Skip to content
Pingmuce.pingmuce.com
Records
SCREEN KNOWLEDGE

Why does a 144 Hz monitor test at 60 Hz? Check settings and browser timing

Separate a monitor's advertised refresh rate, the system setting and a browser estimate. Check the selected display, connection, dynamic refresh and foreground sampling.

PingmuceUpdated
The key ideaThe number describes browser timing under the current conditions

A 144 Hz display supports that rate under the right conditions; a webpage does not necessarily report 144 every time. Check the target display's system setting first and use the browser estimate as another observation. One 60 Hz result does not prove a falsely advertised panel.

Understand three different numbers

Refresh rate describes display updates per second, measured in Hz. Product specifications, the current system setting and a webpage estimate answer different questions. Identify which number you are comparing.

Where the number comes fromWhat it describes
144 Hz in the specificationA supported rate under the resolution, connection and settings stated for that model.
Advanced display settingsThe refresh-rate setting for the selected display; first confirm the correct monitor in a multi-display setup.
Browser refresh estimateTiming estimated from browser frame callbacks, affected by the runtime conditions rather than a hardware certification.

First: select the correct display and rate in the system

In Windows, open Settings → System → Display → Advanced display to inspect display information and available refresh rates. With multiple screens, select the one you intend to test before checking its current setting. On other systems, use the relevant display settings.

If the expected rate is missing, check resolution, ports, cables, adapters and the device documentation. Its absence in one setup does not describe every supported connection, and a webpage cannot enable the system setting for you.

Second: keep the page foreground for a timing sample

Pingmuce estimates timing from requestAnimationFrame callback intervals. This describes the current page's execution. Background tabs may pause or throttle callbacks, and competing work can interfere.

  1. Move the window to the intended monitor

    Keep the window on one display rather than spanning two, then open the refresh estimate tool.

  2. Reduce competing work

    Pause unnecessary video, games or other demanding pages and keep this page foreground.

  3. Complete the tool's 10-second sample

    Start the full-screen test without switching away during sampling. Inspect both the estimate and its variation rather than one momentary value.

  4. Repeat under the same conditions

    Record the system setting, power state and browser, then compare both runs rather than retaining only the higher number.

Open the refresh estimate and take a sample

Compare conditions when system and browser numbers differ

Some devices support dynamic refresh or power-saving policies that adjust behavior with activity and power state. Check the model and system documentation to distinguish automatic behavior from a fixed setting.

Browser timing, game FPS and pixel response time are different measures. FPS describes frame generation; response time concerns pixel changes. Frame intervals do not measure true pixel response time or establish whether screen tearing occurs.

Keep enough detail for a useful comparison

For example: system set to 144 Hz, browser fully on the external display, tab foreground, two estimates of ..., currently plugged in. After changing a connection or setting, repeat the same method and keep both sets of conditions.

If the system consistently lacks an expected documented option, or everyday use is affected, bring the model, connection and system details to the maker. The webpage result is a troubleshooting clue rather than certification of the specification.

References

Related tools and guides

Use a related tool or learn the inspection method described in this article.

Start the browser refresh estimateInspect ghosting and motion separatelyContinue the monitor check