Skip to content
Pingmuce.pingmuce.com
Records
Check flowsMonitor check
7 TESTS · About 8–12 minutes

New monitor check.

Check a new monitor for dead pixels, backlight bleed, uniformity, grayscale, sharpness, browser refresh timing, and ghosting. Follow the steps and save a report, skipping anything you have not inspected.For a single check, open Dead pixel test or Refresh rate test.

Before you start

  • Use native resolution
  • Use 100% browser zoom
  • Note your display settings
Show tipsHide tips
  • Use the monitor’s native resolution and 100% browser zoom. Move this page to that display.
  • Start at your usual brightness. Recheck black-screen edges in a dim room; use normal room light for other tests.
  • Note the display mode, refresh rate and overdrive setting. Repeat the same test combination after changes.
Dead & stuck pixels / WhiteLIVE
←→CycleSpaceStart / pause↑↓Cycle intervalHHide controlsF/EscExitUser guide
Your observation

Select a result to record it.

View records

Dead & stuck pixels · Observation guide

Show guideHide guide

Compare the illustrations

Normal referenceSolid-color reference
Issue illustrationLook for fixed points

Illustrations only, not your screen’s result. Differences are exaggerated.

How to inspect

  1. Scan the screen

    Inspect slowly from center to corners at a normal viewing distance.

  2. Check across colors

    Cycle white, black, red, green and blue. Check whether an unusual point stays in the same place.

What to do if you notice a difference

Clean, change colors and viewing angle. If it remains fixed, note its position and the colors that reveal it.

Understanding the result

Visual inspection is required. A website cannot detect dead pixels automatically or guarantee a stuck-pixel repair.

Go back or skip any test. Skipping does not add or overwrite records. Core and recommended labels guide the sequence; they are not pass criteria. View records · Read the monitor inspection guide

Choose a check flow

Prepare → inspect each step → report

4 tests · About 3–5 minutesStart here

Quick check

Inspect the basic display patterns in sequence.

Dead & stuck pixels / Backlight bleed / Uniformity & retention / Grayscale & contrastView flow
3 tests · About 3–5 minutes

Phone check

Inspect phone pixels, uniformity and touch response.

Dead & stuck pixels / Uniformity & retention / Touch testView flow
7 tests · About 8–12 minutes

Monitor check

Check a new monitor for dead pixels, backlight bleed, uniformity, grayscale, sharpness, browser refresh timing, and ghosting. Follow the steps and save a report, skipping anything you have not inspected.

Dead & stuck pixels / Backlight bleed / Uniformity & retention / Grayscale & contrast / Patterns & sharpness / Refresh estimate / Ghosting & motionView flow
5 tests · About 6–10 minutes

OLED screen check

Inspect near-black uniformity, fixed outlines, shadow detail and motion on OLED phones and monitors.

Dead & stuck pixels / Uniformity & retention / Grayscale & contrast / Color & gradients / Ghosting & motionView flow
3 tests · About 3–5 minutes

Gaming & high refresh

Inspect browser frame pacing, motion trails and shadow detail. Repeat the same patterns after changing refresh rate or overdrive settings.

Refresh estimate / Ghosting & motion / Grayscale & contrastView flow
3 tests · About 3–5 minutes

Office & text check

Start with text, lines and grids to inspect blurred strokes, sharpening halos, white-screen uniformity and grayscale detail.

Patterns & sharpness / Uniformity & retention / Grayscale & contrastView flow