Clean first and compare several backgrounds. A suspicious point needs a second look; one observation alone does not confirm a hardware fault.
Start by describing the point
A screen picture consists of tiny pixels. A position that does not change as expected may appear dark, bright or colored. People sometimes use dead pixel loosely for several kinds of point defects, so describing its appearance is clearer.
Look beyond black dots: inspect dark points on white, bright points on black, and colored points on other backgrounds. The illustration exaggerates the difference to explain the appearance; it is not a reading of your screen.
Why these five colors?
Each background gives you a different comparison. A point can be obvious on one color and difficult to see on another. Revisit a suspicious position after every color change.
| Background | What to look for |
|---|---|
| White | Fixed dark or black points. |
| Black | Bright or colored points; check for reflections too. |
| Red, green, blue | Compare the same position with its surrounding color on each background. |
Inspect in four steps
Open Dead & stuck pixels at your usual brightness in normal room light. Read the preparation advice, choose white, and start the test.
White: scan the whole screen
Scan slowly from the top left across each row, working downwards, then inspect edges and corners.
Black: repeat the same scan
Change to black and repeat the scan. Use the on-screen controls if you prefer.
Red, green, blue: pause at a point
Continue with red, green and blue. Pause at a suspicious point and note a location, such as upper right, about a finger-width from the edge.
Revisit the same position
Return to earlier colors and compare whether the point persists and which backgrounds reveal it most clearly.
Rule out dust and reflections
Leave the test, clean according to the maker’s advice, and return to the same background. Change your viewing angle slightly. A protector may also have bubbles, scratches or dust.
Make a useful observation record
A single tool saves its latest observation; a device flow gathers that run into a report. A note such as small dark point in the upper-right on white, still visible after cleaning is more useful for comparison than screen looks bad.
A screenshot generally does not show a physical panel defect. Take a separate photo if you need to document the visible point, noting background and brightness. The maker’s policy determines any service or replacement decision.